Logo
Logo
Boramtec Bohr & Rammtechnik Berlin GmbH
10318 Berlin, Köpenicker Allee 123-125
Machinepark & Workshop
15378 Herzfelde, Ahornstraße 7
Tel: +49 (30) 50174 50-0
Fax: +49 (30) 50174 50-11

Detailview
Oil drilling rig 5000 m

Oil drilling rig  5000 m
Oil drilling rig BU 5000/320 5000 m

Detaildescription

The drilling rig is new and has not been in operation.

THE COMPOSITION OF THE DRILLING RIG BU 5000/320
1 DRILLING MODULE
1.1 Structures
1.1.1 Cantilever mast - 464 m x 975 m
1.1.2 Complete mast support
1.1.3 Folding outrigger base - 10 m
1.1.4 Reception bridges and pipe racks
1.1.5 Drilling mud discharge line - 325 mm
1.1.6 Subrotor funnel for discharge of drilling mud coming out of the borehole
1.2 Lifting equipment
1.2.1 Drilling winch with AC gear drive DSGD-320 mt
1.2.2 Hoist unit - 375 t Dreco
1.2.3 Rigging device for fixing the fixed end of 100 thousand lb hoist rope
1.2.4 Electric reel of hoist rope 1676 m
1.2.5 Hoist Rope - 35 mm 6x19 2200 m
1.3 Rotating equipment
1.3.1 Top drive TDS-11SA
1.3.2 Rotor table D-375
1.3.3 Standard swivel P-500
1.4 Cab & Controls
1.4.1 Driller's cabin
1.4.2 Integrated control system Amphion for land-based drilling rigs
1.4.3 Video surveillance system
1.4.4 Two-way Communication System - Echelon DR Section
1.4.5 Fire and Gas Alarm System - Echelon DR Section
1.4.6 Sensors - Echelon DR Section
1.4.7 Instrumentation and Control System for Drilling Control RigSense 3.21
1.4.8 Flash Drive Rigsense
1.5 Winches and safety equipment
1.5.1 Top Worker's Balloon Winch - Hadef 43/86E
1.5.2 Ingersoll Rand auxiliary winch - FA5i-24MK1C2M3J123V-CE
1.5.3 Transfer system the principle of possible displacements - Echelon type DR
1.5.4 Girder Lift Trolley - (electric)
1.5.5 Girder Lift Trolley - (manual)
1.5.6 Riding worker fall prevention device - Echelon DR Section
1.6 Main hydraulic power unit
1.6.1 Hydraulic power unit - 400 V -55 kW -EACEX
2 Pipe handling equipment
2.1 Hydraulic wrench
2.1.1 Hydraulic wrench ST-80C2
2.2 Automatic wedge clamp
2.2.1 PSF automatic wedge gripper - rotor table drive nipple 27-1/2" and 37-1/2"
2.2.2 Control unit for SLT wedge clamp lifter / PSF automatic wedge clamp frame
PSF wedge gripper
2.2.3 Hand wedges for gripping pipes in rotor SDXL - 5" x 5"
2.3 Hydraulic Spool Reels
2.3.1 Hydraulic pin reel HC-26
2.4 Articulated crane
2.4.1 Articulated crane - INMAN 600
3 DRILLING AUXILIARY EQUIPMENT MODULE
3.1 Power generation and distribution
3.1.1 Power supply connection
3.2 High pressure circulation system
3.2.1 Drilling pump FD-1600
3.2.2 High pressure manifold
3.2.3 Double discharge manifold
3.2.4 Rack and Gooseneck
3.3 Low pressure circulation system
3.3.1 King Cobra Hybrid vibrating screen
3.3.2 Collector of the King Cobra Hybrid mud preparation system
3.3.3 Flow divider
3.3.4 Overhead vacuum degasser DG-10/12
3.3.5 Speed-controlled drive Brandt HS-3400 (hydraulic)
3.3.6 Centrifuge Brandt HS-3400 (electric)
3.3.7 Feed pump - Mono B07
3.3.8 Mixer - PBRT-75-GK-1500-22-900-Turbo
3.3.9 Brandt™ 3" Low Pressure Drilling Fluid Jet Mixer (for Integrated Mud Tank Systems)
3.3.10 Brandt 6" Low Pressure Drilling Fluid Stirrer
3.3.11 Internal Screw Conveyor
3.3.12 Magnum standardised pump unit
3.3.13 Magnum standardised pump unit
3.3.14 Magnum standardised pump unit
3.3.15 Magnum standardised pump unit
3.3.16 Magnum vertical pump unit
3.3.17 Magnum vertical unified pump
3.3.18 Magnum standardised vertical pump
3.4 Accessory module designs
3.4.1 Drilling Support Unit - General Description
3.4.2 Refill tank module (refill tank pump module and refill tank module)
3.4.3 Centrifuge and Conveyor Module (CC)
3.4.4 Flocculation module
3.4.5 Drilling fluid zone module
3.4.6 Mud tank module and mud tank module (M and MT)
3.4.7 Mud tank module 2 and 3
3.4.8 Throttle Manifold Room
3.4.9 Receiving tank module
3.4.10 Back-up pump module
3.4.11 Drilling pump module 1
3.4.12 Drilling pump module 1
3.4.13 Drilling pump module 2
3.4.14 Drilling pump module 2
3.4.15 Workshop module
3.4.16 Compressor module
3.4.17 Transformer module
3.4.18 Power supply and control panel module
3.4.19 AC equipment module
3.4.20 Medium voltage equipment module (MVM)
3.4.21 Preparation for winter operation of the drill rig on site
3.4.22 Gangways platform crossings handrails
4 PRESSURE CONTROL EQUIPMENT
4.1 Pressure control system
4.1.1 Pressure Control System for 6 stations 264 gallons
4.1.2 Throttling Manifold 3-1/8" working pressure 350 MPa
4.1.3 Killing Manifold 3-1/8" working pressure 350 MPa
5 AUXILIARY SYSTEMS
5.1 Auxiliary systems and equipment
5.1.1 Generating set C18/ 480 kW/ 600 KVA with container
5.1.2 Pneumatic system block station - BKK194/10-2 (DEN-75Sh)
5.1.3 HVAC system - General notes
5.1.4 Ruffneck Fan 24" Steam Heater
5.1.5 Ruffneck Fan Steam Heater 20"
5.1.6 Ruffneck Fan Steam Heater 16"
5.1.7 Explosion proof electric Ruffneck fan heater FE2 (185 kW)
5.1.8 Explosion proof electric Ruffneck FE2 heater (46 kW)
5.1.9 Explosion proof electric Ruffneck FE2 heater (28 kW)
6 HANDLING SYSTEM
6.1 Rail handling system
6.1.1 Guide rails with leveling devices and connections
6.1.2 Lift jacks on the base plate
6.1.3 Articulated chain rollers
6.1.4 Rig handling system


data

Type
"BU 5000/320"

Construction year
2018

drilling depth
5000 m

hook load
320 t


Oil rig_data sheet